An electric shower is a convenient and efficient way to have a hot shower, however, like any other device it can break down or become outdated. Replacing an electric shower can take several hours, depending on the complexity of the installation and the type of shower you are installing. Here is a guide on how long it takes to replace an electric shower, and the steps involved.
The Time It Takes to Replace an Electric Shower:
- 2 to 4 hours for a basic installation
- 4 to 6 hours for a more complex installation
Tools you need:
- New electric shower
- Water supply hose
- Electrical cable
- Screwdrivers
- Adjustable wrench
- Drill
- Wall anchors
- Teflon tape
- Silicone sealant
DIY: How to Replace an Electric Shower in Under 4 Hours
Step 1: Turn off the Power and Water
The first step in replacing an electric shower is to turn off the power and water supply to the existing shower. This will prevent any accidents or damage while you are working on the shower.
Step 2: Remove the Old Shower
Remove the old shower by carefully unscrewing it from the wall and disconnecting any water and electrical connections. Be sure to keep all the screws and parts in a safe place, as they will be needed later.
Step 3: Install the New Shower
Install the new electric shower by following the manufacturer’s instructions. This may involve attaching the water supply hose, electrical cable, and other parts to the shower. Be sure to use Teflon tape on any threaded connections to ensure a tight seal.
Step 4: Mount the Shower
Once the new electric shower is connected to the water supply and electrical supply, it’s time to mount it to the wall. This may involve drilling holes in the wall and using wall anchors to secure the shower in place.
Step 5: Seal the Shower
Use silicone sealant to seal around the edges of the shower to prevent water from leaking behind the shower.
Step 6: Turn on the Power and Water
Finally, turn on the power and water supply to the new electric shower, and test it to make sure it is working properly.
FAQ’s
How long does it take to replace an electric shower?
The time it takes to replace an electric shower can vary depending on the complexity of the installation. A basic installation can take between 2 to 4 hours, while a more complex installation can take between 4 to 6 hours.
Can I replace an electric shower myself or do I need a professional?
Replacing an electric shower can be a complex task and it’s important to have a certain level of plumbing and electrical skills. If you’re not comfortable with this kind of work, it’s best to hire a professional to do the job.
Can I keep the same showerhead and hose when I replace the electric shower?
It depends on the type of showerhead and hose you have and the compatibility with the new electric shower. It’s best to check with the manufacturer or a professional to see if your existing showerhead and hose can be used with the new electric shower.
Do I need special tools to replace an electric shower?
To replace an electric shower, you will need screwdrivers, an adjustable wrench, a drill, wall anchors, Teflon tape, and silicone sealant.
Can I replace an electric shower with a different type of shower?
Yes, you can replace an electric shower with a different type of shower such as a power shower or a mixer shower. However, it’s important to keep in mind that the installation process and requirements may differ, so it’s best to consult a professional before proceeding.
Conclusion
In conclusion, replacing an electric shower can take anywhere from 2 to 6 hours depending on the complexity of the installation. It is important to follow the manufacturer’s instructions and to have the proper tools and materials on hand. Always remember to turn off the power and water supply before starting the installation, and to test the shower after installation is completed.
