Are you tired of your razor lying around in your shower, making it look untidy and cluttered? If so, it might be time to make a DIY shower razor holder to keep everything neat and organized. PVC pipes are an excellent material to use, as they are affordable and easy to work with. In this article, we’ll take a look at how to make a DIY shower razor holder using PVC pipes, step-by-step.
How to Make a DIY Shower Razor Holder Using PVC Pipes
Materials Needed:
- 2-inch diameter PVC pipe (length depends on the number of razors you want to store)
- PVC cutter or saw
- Sandpaper
- Adhesive glue
- Mounting tape or suction cups (optional)
Step-by-Step Guide:
Measure and Cut PVC Pipe
The first step in making your DIY shower razor holder is to measure and cut your PVC pipe. The length of the pipe depends on how many razors you want to store. Generally, cutting the PVC pipe into sections of 1.5-2 inches long should be sufficient for most razor handles.
To cut the PVC pipe, use a PVC cutter or saw. If using a saw, be sure to cut slowly and carefully to avoid any jagged edges.
Sand the Edges
After cutting the PVC pipe into sections, use sandpaper to smooth any rough edges. This step is important to ensure that your razor handles won’t get scratched or damaged while in the holder.
Apply Adhesive Glue
Next, apply adhesive glue to the bottom of each PVC piece. You can use any type of adhesive glue that works well with PVC material. Place the PVC pieces on the wall of your shower, spaced apart to accommodate your razors. Be sure to hold the PVC pieces in place for a few seconds to ensure they stick to the wall.
Secure the Razor Holder (Optional)
If you want to ensure that your razor holder stays in place, you can use mounting tape or suction cups to secure it to the wall. This step is optional, but it can provide extra stability and prevent the holder from falling off the wall.
FAQS
What length should I cut the PVC pipe to make a DIY shower razor holder?
The length of the PVC pipe sections depends on how many razors you want to store. Generally, cutting the PVC pipe into sections of 1.5-2 inches long should be sufficient for most razor handles.
Can I use any adhesive glue to attach the PVC pieces to the shower wall?
You can use any type of adhesive glue that works well with PVC material. Be sure to read the instructions on the adhesive glue before using it to ensure it’s safe for use with PVC.
Do I need to secure the razor holder to the wall?
Securing the razor holder to the wall is optional, but it can provide extra stability and prevent the holder from falling off. You can use mounting tape or suction cups to secure the holder to the wall. However, if you’re using a strong adhesive glue, you may not need to secure it further.
Conclusion
In conclusion, making a DIY shower razor holder using PVC pipes is an excellent solution to keep your razor organized and accessible in the shower. PVC pipes are affordable and easy to work with, making them an ideal material for this project. By following the simple steps outlined above, you can create your own DIY shower razor holder in no time.
